All the workstations must be connected to at least an Ethernet or better network when sharing a screen to more than 1 workstation at a time.
This command can’t be completed because the selected workstations are using a mixture of both lower and higher performance networks.
You can only use this command with 50 workstations at one time.
There isn’t enough free memory on ^1 of the selected workstations to generate the report.
There isn’t enough free memory on “^1” to generate the report.
You can’t quit applications on ^1 of the selected workstations because their screens are locked.
You can’t quit applications on “^1” because the screen is locked.
^1 of the selected workstations can’t be observed simultaneously with other workstations. The multiple observe feature requires all workstations to be connected to at least an Ethernet network.
“^1” needs to be connected to at least an Ethernet connection in order for it to be observed simultaneously with other workstations.
You need to be connected to at least an Ethernet network in order to observe more than one workstation at a time.
“^1” is only able to communicate using TCP/IP and thus can’t communicate with “^2”.
“^1” is only able to communicate using AppleTalk and thus can’t communicate with “^2”.
You have entered too many keys. Command keys can only be a single character.
The Open Transport settings on ^1 of the selected workstations can’t be changed because they’re using MacTCP. The Internet Configuration settings, however, were changed.
The Open Transport settings on “^1” can’t be changed because it’s using MacTCP. The Internet Configuration settings, however, were changed.
The MacTCP settings on ^1 of the selected workstations can’t be changed because they’re using Open Transport. The Internet Configuration settings, however, were changed.
The MacTCP settings on “^1” can’t be changed because it’s using Open Transport. The Internet Configuration settings, however, were changed.
The TCP/IP settings on ^1 of the selected workstations can’t be changed because they don’t have TCP/IP installed. The Internet Configuration settings, however, were changed.
The TCP/IP settings on “^1” can’t be changed because it doesn’t have TCP/IP installed. The Internet Configuration settings, however, were changed.
The changes you made to the preferences will take place the next time you begin screen sharing.
You can’t use this command when you are sharing your screen.
You can’t use this command on workstations that are sharing screens.
You must first have at least one list before you can add users.
^1 of the workstations in this template aren’t currently being administered. Do you want to generate the report with the valid workstations in the template?
“^1” isn’t currently being administered. Do you want to generate the report with the valid workstations in this report template?
None of the workstations in this report template are currently being administered.
You can’t text chat with “^1” because the screen is locked.
You can’t text chat with “^1” because it is already text chatting.
You can’t copy items to a locked disk.
The key you entered is used for the “^1” command. Please enter a different key.
The text message couldn’t be sent to ^1 of the selected workstations because their screens are locked.
The text message couldn’t be sent to “^1” because the screen is locked.
Are you sure you want to begin chatting with “^1”? ^2
^1 of the selected workstations are currently processing a previous Network Assistant command. Please wait until the workstations are finished and try again.
“^1” is currently processing a previous Network Assistant command. Please wait until the workstation is finished and try again.
The TCP/IP settings on ^1 of the selected workstations can’t be changed because they don’t have TCP/IP installed.
The TCP/IP settings on “^1” can’t be changed because it doesn’t have TCP/IP installed.
Begin typing your message:
Please enter a number from 1 to 15 for the percentage of the available RAM to use for the disk cache.
You can’t copy an item that isn’t installed.
Text chat with “^1” couldn’t take place because it is screen sharing.
The address must be a valid TCP/IP address of the form “XXX.XXX.XXX.XXX” where “XXX” is a number from 0 to 255.
There was a problem communicating with “^1”.
The Open Transport settings on ^1 of the selected workstations can’t be changed because they’re using MacTCP. The command was canceled.
The Open Transport settings on “^1” can’t be changed because it’s using MacTCP.
The MacTCP settings on ^1 of the selected workstations can’t be changed because they’re using Open Transport. The command was canceled.
The MacTCP settings on “^1” can’t be changed because it’s using Open Transport.
There is no System Folder on the disk “^1”.
You can only Get Info on one item at a time.
The name must be a valid Internet host name or a valid TCP/IP address of the form “XXX.XXX.XXX.XXX” where “XXX” is a number from 0 to 255.
You must select at least one preference if you don’t want to change all of the Internet Prefs.
“^1” has no TCP/IP address defined.
You can only set the TCP/IP address on workstations that are using static TCP/IP addresses. “^1” isn’t using static addressing.
The TCP/IP preference file on “^1” isn’t in the format we expect. Make sure that the TCP/IP software is correctly installed.
“^1” has an incompatible version of TCP/IP software installed.
Unable to change the TCP/IP address on “^1”.
You can only chat with one person at a time. More than one workstation is currently selected.
You can only get a version report on 10 items at a time. If you need to compare more items, use the Software Difference command.
The key you entered is invalid. Please enter a different key.
This feature is disabled in the demo version.
You can only “Rename” one workstation at a time. More than one workstation is currently selected.
Enter a new name for the workstation:
You can’t announce to ^1 of the selected workstations because the workstations must be connected to a higher performance network. This command requires at least an Ethernet network.
You can’t announce to “^1” because the workstation must be connected to a higher performance network. This command requires at least an Ethernet network.
You can’t observe or control “^1” because your monitor does not support the necessary setting.
You can only announce to 50 workstations at a time.
Talk is not supported on this workstation.
Announce is not supported on this workstation.
“^2” couldn’t be opened on ^1 of the selected workstations because there isn’t enough memory available.
“^2” couldn’t be opened on “^1” because there is not enough memory available.
You couldn’t talk to “^1” because an error occurred.
“^1” does not support talking.
You couldn’t talk to “^1” because the sound input hardware is in use.
There is a problem screen sharing with “^0”. There may have been a communication error or another administrator may have begun screen sharing with “^0”.
The printer settings on ^1 of the selected workstations couldn’t be changed because they have QuickDraw GX installed.
The printer settings on “^1” couldn’t be changed because it has QuickDraw GX installed.
The printer settings on ^1 of the selected workstations couldn’t be changed because they do not have QuickDraw GX installed.
The printer settings on “^1” couldn’t be changed because it does not have QuickDraw GX installed.
Lock the screens on the ^0 selected workstations with the following message:
Lock the screen on “^0” with the following message:
You couldn’t lock the screen on ^1 of the selected workstations because they have Network Assistant open.
You couldn’t lock the screen on “^1” because it has Network Assistant open.
You couldn’t quit the applications on ^1 of the selected workstations because they have Network Assistant open.
You couldn’t quit the applications on “^1” because it has Network Assistant open.
^1 of the selected workstations couldn’t be shut down because they have Network Assistant open.
“^1” couldn’t be shut down because it has Network Assistant open.
^1 of the selected workstations couldn’t be restarted because they have Network Assistant open.
“^1” couldn’t be restarted because it has Network Assistant open.
Network Assistant cannot be used on a workstation that is being controlled by another administrator.
The text message couldn’t be sent to ^1 of the selected workstations because they are sharing screens.
The text message couldn’t be sent to “^1” because it is screen sharing.
You must have at least one command in the toolbar.
AppleTalk must be active in order to use Network Assistant. Use the Chooser to make AppleTalk active and restart your workstation.
^1 of the selected workstations need at least an Ethernet connection in order to send all screen changes. Use the Preferences command to set QuickDraw based screen sharing when all workstations aren’t connected to at least an Ethernet network.
“^1” needs at least an Ethernet connection in order to send all screen changes. Use the Preferences command to set QuickDraw based screen sharing when all workstations aren’t connected to at least an Ethernet network.
The selected workstations are no longer available.
^1 of the selected workstations couldn’t be shut down because an error occurred.
“^1” couldn’t be shut down because an error occurred.
^1 of the selected workstations couldn’t be shut down because a modal dialog is on the screen. You must use the immediate shut down option when a modal dialog is on the screen.
“^1” couldn’t be shut down because a modal dialog is on the screen.
^1 of the selected workstations couldn’t be restarted because an error occurred.
“^1” couldn’t be restarted because an error occurred.
^1 of the selected workstations couldn’t be restarted because a modal dialog is on the screen. You must use the immediate restart option when a modal dialog is on the screen.
“^1” couldn’t be restarted because a modal dialog is on the screen.
“^2” couldn’t be opened on ^1 of the selected workstations because an error occurred.
“^2” couldn’t be opened on “^1” because an error occurred.
“^2” couldn’t be opened on ^1 of the selected workstations because its application couldn’t be found.
“^2” couldn’t be opened on “^1” because it’s application couldn’t be found.
“^2” couldn’t be opened on ^1 of the selected workstations because it couldn’t be found.
“^2” couldn’t be opened on “^1” because it couldn’t be found.
“^2” couldn’t be opened on ^1 of the selected workstations because a modal dialog is on the screen.
“^2” couldn’t be opened on “^1” because a modal dialog is on the screen.
You couldn’t quit the applications on ^1 of the selected workstations because an error occurred.
You couldn’t quit the applications on “^1” because an error occurred.
You couldn’t quit the applications on ^1 of the selected workstations because a modal dialog is on the screen.
You couldn’t quit the applications on “^1” because a modal dialog is on the screen.
The monitor settings on ^1 of the selected workstations couldn’t be changed because the requested setting isn’t supported.
The monitor settings on “^1” couldn’t be changed because the requested setting isn’t supported.
Unable to communicate with the selected workstations.
There is already a report named “^0”. Please use a different name.
You must give the report a name.
You must give each workstation a name before adding it to a workstation list. Use the Sharing Setup control panel on the workstation to set the machine and owner names.
You need to be connected to a higher performance network connection in order to use this command. Use the Preferences command to set QuickDraw based screen sharing when all workstation aren’t connected to at least an Ethernet network.
You can’t observe or control a screen that is displaying millions of colors.
You can’t share a screen with itself.
To copy items in the trash you must first move them to your hard disk.
The trash can’t be copied.
To copy a disk to the selected workstations, select all of the items on the disk and drag them to the selected workstations.
To copy a hard disk to the selected workstations, use the “Copy Hard Disk” command.
To use this command, select one or more items from this report.
You can’t share a screen that is displaying millions of colors.
A screen is already being shared with “^0”. Do you want to:
A screen is already being shared with all of the selected workstations. Do you want to:
A screen is already being shared with ^0 of the ^1 selected workstations. Do you want to:
Video is already showing on “^0”. Do you want to:
Video is already showing on all of the selected workstations. Do you want to:
Video is already showing on ^0 of the ^1 selected workstations. Do you want to:
You can’t control, observe or share your screen with another workstation when your workstation is being controlled.
You can’t observe or control a workstation that has Network Assistant open.
“^0” doesn’t allow administrator access. Administrator access must be enabled using the Network Assistant Security application on that workstation.
The list “^0” does not contain any workstations. Every list must include at least one workstation.
To use this command, you must first select one or more items from a Software Version, Software Difference, or Software Search report.
There is already a list named “^0”. Please use a different name.
You can only share screens with 2 workstations at a time.
You aren’t authorized to use this application. Contact your At Ease administrator for more information.
You aren’t authorized to use this command. Contact your At Ease administrator for more information.
The command wasn’t authorized on ^0 of the workstations.
The command wasn’t authorized on “^0”.
Only ^0 commands will fit in the toolbar. Please remove ^1 of the commands.
Select the system settings you want to change on the ^0 selected workstations:
Select the system settings you want to change on “^0”:
Select how to shut down the ^0 selected workstations:
Select how to shut down “^0”:
Select how to restart the ^0 selected workstations:
Select how to restart “^0”:
Are you sure you want to rebuild the desktop database on the ^0 selected workstations? This may take a few minutes.
Are you sure you want to rebuild the desktop database on “^0”? This may take a few minutes.
Before you can use Network Assistant, you must select the workstations that you wish to manage.
The next screen will allow you to search the network and create lists of workstations to administer.
Select a channel to show on the ^0 selected workstations.
Select a channel to show on “^0”.
Select a screen to share with the ^0 selected workstations.
Select a screen to share with “^0”.
There was a problem communicating with the network router. Some of the zones on your network may not appear in the list.
You can’t add any more workstations to the workstation list. This demo version is limited to administering 2 workstations. Up to 250 workstations can be in each list in the full version.
Only 1 workstation list is avaialble using this demo version. Up to 20 lists can be created in the full version.
You must enter a name for this workstation list.
You must create at least one workstation list.
Enter the message to send to the ^0 selected workstations.
Enter the message to send to “^0”.
You must close one of your existing report windows before another report can be created.
You can’t show video on workstations that are sharing screens.
You can’t share the screen from “^1” because it is unavailable.
An unknown driver is installed in the V-LAN hardware.
Unable to access the TV tuner hardware because it is in use.
You can’t control other workstations while your screen is being shared.
Screen sharing couldn’t be started on the selected workstations. Check the Workstation Status window for error messages.
You can’t observe other workstations while your screen is being shared.
This command couldn’t be completed because there isn’t enough memory available.
This command couldn’t be completed because there isn’t enough memory available on the selected workstations.
Chapter numbers must be between 0 and 79.
Frame numbers must be between 0 and 108000.
Time values for laserdiscs must be less than 1 hour.
Time values for minutes and seconds must be between 0 and 59.
Time values must be entered in Minutes:Seconds format. For example, to enter 10 minutes and 30 seconds, type “10:30”.
Time values must be entered in Hours:Minutes:Seconds format. For example, to enter 1 hour 10 minutes and 30 seconds, type “01:10:30”.
The selected workstations couldn’t be observed because there isn’t enough memory available.
The selected workstation couldn’t be controlled because Network Assistant has not been properly installed.
The selected workstation couldn’t be controlled because there isn’t enough memory available.
This disc doesn’t support chapter searching.
This command isn’t supported for Extended Play (CLV) discs.
There is no laserdisc in the player.
You must select a workstation from the list before copying the items.
You must have a printer selected before updating the printer setting.
The settings on ^1 of the selected workstations couldn’t be changed because an error occurred.
The settings on “^1” couldn’t be changed because an error occurred.
Network Assistant requires a display screen that is at least 640 by 480 pixels.
To use this command, you must select a workstation in the front window.
You can only “Control” one workstation at a time. More than one workstation is currently selected.
You can’t change the monitor depth because one or more of the selected workstations is sharing screens.
The necessary video hardware couldn’t be found. To use the video controls, your workstation must have video input and TV capabilities.
Network Assistant requires version 1.5 or later of the QuickTime extension to be installed. Make sure it has been installed in the Extensions folder and that your workstation has been restarted.
Network Assistant requires that AppleTalk be enabled and that version ^0 of the Network Assistant Startup extension be installed.
Verify that AppleTalk is enabled, Network Assistant Startup is installed, and then restart the workstation.
The video hardware is already in use by another application. You must quit that application before using the video controls.
You can only “Talk” to one user at a time. More than one workstation is currently selected.
The text “^0” wasn’t found.
This command isn’t currently supported.
The V-LAN controller isn’t responding. Check the V-LAN connections and power.
The command couldn’t be sent to the video device. Make sure the device is connected and turned on.
The video device port hasn’t been set. Please use the “Video Devices” menu command to set up the port.
No video devices are connected. You must connect the V-LAN equipment to your workstation before you can set up video devices.
The command couldn’t be sent to the device.
The serial port is in use by another application. You won’t be able to control video devices.
You must enter a name for this device.
The channel number must be between ^0 and ^1.
There was a problem communicating with ^0 of the workstations.
There was a problem communicating with “^0”.
Network Assistant does not support printing from the Finder.
An error occurred while writing the Network Assistant Preferences file.
An error occurred while reading the Network Assistant Preferences file.
There isn’t enough memory to continue.
Network Assistant requires system version 7.1 or later.